Skip to content
How to care for a PDA in a courier application?

How to care for a PDA in a courier application?

As a new thing, investment recruiters often have to go through a step-by-step adaptation process when they first use PDA. For this, the majority of investment recruiters should have a correct understanding and should not be troubled. Problems encountered in the process, adapt to high-tech products as soon as possible.


As an indispensable equipment for investment recruiters' daily work, it is necessary to strengthen maintenance and maintenance on weekdays.


1.During the production and operation, the recruiters should carry the PDA with them, so that the machine will not leave the body.

 2.It is forbidden to place the PDA on the dashboard of the vehicle to avoid damage to the PDA caused by high temperature.


3.If the PDA fails to scan the barcode or cannot correctly identify the barcode during use, the recruiter should first check whether the PDA's battery power and voltage are sufficient, and whether the temperature is normal. The PDA will stop uploading information when the battery is below 30%. In this regard, the recruiters must charge the PDA in time after returning to work every day to ensure normal use the next day.


4.Shut down first, then touch the cleaner on the rag, and gently wipe the screen and keyboard. Avoid spraying cleaning agents directly on the PDA device.


5.Prevent accidental drops and collisions: The most expensive and important part of a PDA is the touch screen, so be careful when using the PDA. Do not place the PDA device on the edge of the table where it can easily fall.


6.The use of PDA requires suitable temperature and humidity. So try to use the principle of fire and water.


7.Minimize the power consumption of the PDA, and turn off the backlight when not in use to reduce consumption. The general working time is 8-10 hours, and the standby time is about 1-2 days.



Cart 0

Your cart is currently empty.

Start Shopping